Jacketed reactor used for many kind of process like heating, cooling, reaction
Conventional Jackets second shell is installed over a portion of the vessel, creating an annular space within which cooling or heating medium flows. A simple conventional jacket, with no internal components, is generally very inefficient for heat transfer because the flow media has an extremely low velocity resulting in a low heat transfer coefficient. Condensing media, such as steam or Dowtherm A, is an exception because in this case the heat transfer coefficient doesn’t depend on velocity or turbulence, but instead is related to the surface area upon which the media condenses and the efficiency of removing condensate. Internals include baffles that direct flow in a spiral pattern around the jacket, and agitating nozzles that cause high turbulence at the point where the fluid is introduced into the jacket.
Jacketed Vessel Manufacturer
During Exothermic reaction heat will be released by reactants and during Endothermic reaction heat will be absorbed. In both the processes temperature should be controlled as per process requirements for the perfect result. A jacketed vessel will facilitate the above.
Jacketed reactor has a jacket surrounding the main vessel. During reaction, temperature of reactants is controlled by circulating heating or cooling media through the jacket. Ideally suitable for the heating below 150 Centigrade (302 Fahrenheit). Commonly used heat transfer media include water, steam, hot oil such as Therminol™, and Dowtherm A.
Abster Equipment is a proven jacketed vessel manufacturer. Jacketed vessel can also be offered in Dimple design .
Benefits of Jacketed Vessel
Available in the range of 50 Liters to 20,000 Liters
Offered in Stainless Steel 316, 304 or Carbon Steel material
Spirals welded on outer surface of the main vessel for uniform circulation of heating or cooling media like steam, oil, water etc. And also provides extra strength to the main vessel
Save Energy using two part Jacket design for smaller batch
GMP range of equipment available for Pharmaceutical industry. With mirror finish from 220 grit to 440 grit, smooth welding, flush grinding and Insulation with mirror finished S.S cladding
Energy efficient direct drive design for the agitator, with VFD option to vary the RPM of the drive
Agitator design to suit the reactants viscosity and density
Vessel design with form cutter for the process which generates forms
Manufactured as per your specifications
Our other Process Equipment for chemical machinery