What is a ribbon blender and how does it work?
Tags : dry powder mixing powder mixer ribbon blender
Ribbon Blender Principle of operation
Ribbon Blender are a specific type of powder blenders that consist of 2 parts mounted on a central shaft . The mixing medium often consists of inner and outer helical ribbons that are designed to move material both inwards and outwards. The external helical ribbons pull product from the sides of the mixer into the middle and the internal ribbons push the product back to the sides. The back-and-forth folding motion of the materials to be blended creates a convective mixing pattern.
The ribbons blades are designed to have precise gap tolerances between the walls of the mixer. In some instances, they can even be designed with soft material wipers to help keep product from building up on the sides.
The drive mechanism often consists of a belt drive for the powder transmission between the motor and gear box.
This arrangement would use a system of flexible belts and pulleys to produce the desired speed and torque required for the specific mixing application.
However, more manufacturers are starting to use direct drives via gear motors that utilize a motors low inertia rotor to specifically match the gearbox unit.
The advantage of this arrangement means less maintenance over the life of the industrial mixer.
Ribbon Blender mixers are the most versatile and widely used type of powder mixing and blending machine in the market. Ribbon mixer often are most commonly used for solids on solids mixing but can also be used for applications involving coating a dry particle with a liquid ingredient, or even particle absorption of a liquid addition. Rarer applications do allow for slurry and liquid particle suspension mixes with careful design and consideration to detail.
Because of the convective mixing pattern of the ribbon blender, short and fast mixing cycles are possible often ranging from a few minutes up to 20 minutes (depending on the volume and complexity of the formula). Considering the fast-mixing cycles of these bulk solids blenders you would think the ribbons run at a very high RPM, however this is not so.
The ribbon agitators typically run no faster then 24 runs per minute speed.
This low speed creates a gentle folding action of the particles to be mixed.
Therefore, this allows use on fragile and friable materials while preserving the particle integrity.
- Animal feed
- Bake Mixes
- Catalysts
- Ceramics
- Cosmetics
- Fertilizers
- Food
- Instant Drink Mix
- Nutraceuticals
- Pharmaceuticals
- Pigments
- Plastic Powders
- Prill
- Protein Powders
- Resins
- Spices
- Sugar Blends
- Vitamins